Many users have reported that the LED light on their Linksys RE6300 wireless range extenders is blinking red for no reason. Are you also experiencing the same issue? Nodding your head in yes? Well, first of all, know that facing an issue as extreme as this might not be because for no reason. There is got to be a culprit or perhaps more than one culprit behind it. Some examples include that you have not performed Linksys RE6300 setup properly; your device is not receiving proper power supply, it is running on an outdated firmware, and what not.
But, the good thing here is that we can help you to troubleshoot the issue that you are experiencing. How? Well, we have talked about some hacks in this article, which if followed, can help you turn the blinking red LED on your networking device to green. Thus, quit stalling around and get down to reading.
[Resolved] Linksys RE6300 Extender Red Light Issue
1. Check the Power Socket
As we mentioned in the introduction of this post, an inadequate or interrupted power supply is one of the many reasons why the LED light on your Linksys RE6300 extender is blinking red.
To troubleshoot the issue, you have got to check the power socket through which electricity is being supplied to your networking device. Is it damaged? Well, in that case, you need to plug your extender into a different wall socket altogether.
Once you have implemented this hack, it is recommended that you try to access http://extender.linksys.com. Are you unable to? Well then, this just means one thing, i.e. your Linksys extender is still blinking red. Follow the next hack.
2. Tighten the Cable Connection
Another reason why you are experiencing the Linksys extender red light issue is because the Ethernet connection between the wireless extender and the router is loose. This might be because the Ethernet cable currently in use is damaged.
In this case, you can do two things. First, tape up your Ethernet cable, and second, use a new Ethernet cable to connect the networking devices. Make sure that it is properly connected to the ports located on the devices.
Apart from ensuring a stable connection between the RE6300 extender and router, ensure that they are kept at a safe distance. Safe distance means that the devices should neither be placed too far nor close.
3. Perform RE6300 Firmware Update
Considering you are reading this hack means none of the aforementioned troubleshooting hacks helped you to turn the red LED light on your Linksys RE6300 extender to green. No problem. We still have one more hack that can help you out.
That hack requires you to update the firmware of your Linksys RE6300 range extender. There are two methods through which you can update your device. The first method requires you to access extender.linksys.com and another Linksys app.
If you want to know how to perform Linksys RE6300 firmware update in detail, then it is recommended that you walk through the instructions mentioned in the user manual which you got at the time of the extender’s purchase.
In fact, if you ever want to update the firmware of your Linksys router by accessing http //myrouter.local, then also you can refer to the guidelines mentioned in the user manual.
Conclusion
With the last hack, we are wrapping up the article written on how to resolve the Linksys RE6300 extender red light issue. Hopefully, one of the above-mentioned hacks will be able to assist you to troubleshoot the issue at hand.
On the off chance, you are still stuck in the same mess; consider rebooting your Linksys wireless range extender. It will surely be of some help to you.
Check Also: Top Laptop Benefits For The Classroom
